# Gaia installation fails

**URL:** <https://forum.cosmos.network/t/gaia-installation-fails/2513>\
**Category:** Cosmos-SDK\
**Created:** [July 23, 2019, 3:33pm UTC](https://forum.cosmos.network/t/gaia-installation-fails/2513 "2019-07-23T15:33:00Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![schin](https://avatars.discourse-cdn.com/v4/letter/s/49beb7/32.png) [@schin](https://forum.cosmos.network/u/schin)\
**Post date:** [July 23, 2019, 3:33pm UTC](https://forum.cosmos.network/t/gaia-installation-fails/2513/1 "2019-07-23T15:33:00Z")

</div>

Currently following the instructions on installing the Gaia client ([https://cosmos.network/docs/cosmos-hub/gaiacli.html#gaia-cli](https://cosmos.network/docs/cosmos-hub/gaiacli.html#gaia-cli)). I cloned the SDK, but the make tools install command returned “No rule to make target ‘install’. Stop”. I’m not really sure where to proceed here, since I just cloned the Cosmos SDK without any modifications. Is this a problem with the makefile? My `$GOPATH` , `$GOBIN` , and `$PATH` environment variables are set as they should be.

---

<div class="post-metadata">

**Author:** ![Viktor-SP](https://yyz1.discourse-cdn.com/flex031/user_avatar/forum.cosmos.network/viktor-sp/32/822_2.png) [@Viktor-SP](https://forum.cosmos.network/u/Viktor-SP)\
**Post date:** [July 23, 2019, 4:56pm UTC](https://forum.cosmos.network/t/gaia-installation-fails/2513/2 "2019-07-23T16:56:14Z")

</div>

““No rule to make target ‘install”

Hi! Use v0.34.7